How to configure EMAC TM4C1294 Using TI-RTOS

Rick Chelminski

Team,

I'm looking to validate if the EMAC is using the alternate descriptors to allow PTP within the drivers provided by the RTOS. As I was looking around, I had trouble finding where the hw configuration is actually done.

Could their be some guidance given as to how and where this is done?

Regards,

Rick

over 10 years ago

0 Zhaohong Zhang over 10 years ago

TI__Mastermind 22715 points

Rick,

I assume that you are talking about a TI RTOS example. In those examples, the board support library is used. You will not be able to find the source code of the function by doing a function name search. In the CCS project explore window, click the includes and you can find the list of header files and source files for the library. Then you can open those file to look for the function.

Thanks and regards,

Zhaohong

0 Rick Chelminski over 10 years ago in reply to Zhaohong Zhang

TI__Intellectual 1140 points

Thank you Zhaohong, but I was curious more toward what function or sets of functions are used, as examples or not, in configuring the EMAC Peripheral when using NDK+TI RTOS

Regard,

Rick

0 Zhaohong Zhang over 10 years ago in reply to Rick Chelminski

TI__Mastermind 22715 points

Do you mean the TI RTOS features ?

Thanks and regards,

Zhaohong

Arm-based microcontrollers

Arm-based microcontrollers forum

How to configure EMAC TM4C1294 Using TI-RTOS