Halcogen 3.0.9

Richard Derman2

Other Parts Discussed in Thread: HALCOGEN

I need to re-install Halcogen 3.09 on my system, but the only installer I could find on the TI website was for 4.04.00. If anybody can provide a link to the 3.09 installer, I would greatly appreciate it.

Thanks in advance.

over 10 years ago

0 KARTHIKEYAN RAJAMANICKAM over 10 years ago

TI__Genius 11645 points

Hi,

While I check with the Halcogen team, any reason why you do not want to use the latest version ? Thanks.

0 Richard Derman2 over 10 years ago in reply to KARTHIKEYAN RAJAMANICKAM

Intellectual 260 points

Changes made going from 3.0x to 4.0x caused our builds to fail.

0 KARTHIKEYAN RAJAMANICKAM over 10 years ago in reply to Richard Derman2

TI__Genius 11645 points

Okay, someone from Halcogen team will help you on this.

0 Prathap over 10 years ago in reply to Richard Derman2

TI__Genius 14205 points

Hi Richard,

Could it be possible for you to send us the HALCoGen 3.9 Project that you used? ( .dil and HCG). I am trying to figure out what the build error could be. Is it because of the usercode sections missing or something?

0 KARTHIKEYAN RAJAMANICKAM over 10 years ago in reply to Prathap

TI__Genius 11645 points

Hi Richard,

Can you pls help share the project so that prathap can help out ?

0 Richard Derman2 over 10 years ago in reply to KARTHIKEYAN RAJAMANICKAM

Intellectual 260 points

Karthik,

Thanks for your interest. We are staying with 3.05 for the foreseeable future. I don't have an active 4.x project available, so sharing my observation is not currently possible.

Arm-based microcontrollers

Arm-based microcontrollers forum

Halcogen 3.0.9