ADc via Ethernet Tm4c129

Durgesh Gupta

hello,

I am using tiva tm4c129 kit.

I am new to Ethernet and I want to send the ADC pin data via Ethernet.

Plz help me how to proceed for the things. which code should I use. what changes it needed. And how to develop my own server page in which i can display ADC data.

Thanks,

over 10 years ago

0 cb1_mobile over 10 years ago

Guru 117855 points

Suspect that you (and all similar others) will progress much faster & w/less delay, frustration & agony by breaking that HUGE project into far smaller, much easier manageable, pieces.
Serious read/review of MCU manual - chapters based upon your project - and the many API examples & actual code examples - provides a sound beginning.
Task you outlined may not prove quick/easy - and your "specification" (necessarily) limits any attempt at "divining" "changes needed."

0 Amit Ashara over 10 years ago

TI__Guru**** 244400 points

Hello Durgesh,

Did you check the example of enet_io which hosts a web page. of course with correct reading of the document and software you would be able to send data to the page.

Regards
Amit

0 Durgesh Gupta over 10 years ago in reply to Amit Ashara

Prodigy 70 points

Thanks you Amit,
I am working with that example.

Arm-based microcontrollers

Arm-based microcontrollers forum

ADc via Ethernet Tm4c129