Can I use j-link in ccs v4.1 to debug tms570ls20216?

yang gunglun

Intellectual 490 points

Other Parts Discussed in Thread: TMS570LS20216, SEGGER, CCSTUDIO

Can the j-link emulator be used with CCSv4.1 to debug the TMS570LS20216 device?

over 15 years ago

0 Anthony Vaughan over 15 years ago

TI__Intellectual 1475 points

The J-Link JTAG emulator is not supported by Code Composer Studio v4.x for debug of the TMS570LS Series (Cortex R4F CPU) Microcontrollers. Supported emulators include:

XDS100v2 (Low Cost):(multiple vendors)
http://www.blackhawk-dsp.com/products/USB100.aspx
http://www.spectrumdigital.com/product_info.php?cPath=22&products_id=230
http://focus.ti.com/docs/toolsw/folders/print/xds100.html?DCMP=dsp_ccs_v4&HQS=Other+OT+xds100

Spectrum Digital XDS510USB Plus (High End - USB):
http://www.spectrumdigital.com/product_info.php?products_id=195

Texas Instruments XDS560 (High End - PCI):
http://focus.ti.com/docs/toolsw/folders/print/xds560.html

0 Hans Schneebauer over 15 years ago in reply to Anthony Vaughan

Prodigy 10 points

The Keil MDK-ARM supports the TMS570 and the Segger J-Link.

Please check www.keil.com for details.

0 Jerry Lewandowski over 15 years ago in reply to Anthony Vaughan

Prodigy 70 points

You can also use JTAGjet-470, JTAGjet-570 or JTAGjet-CCS from Signum Systems.

They all support CCStudio 3.3 and 4.x. See:

http://www.signum.com/jtagjet.htm

Arm-based microcontrollers

Arm-based microcontrollers forum

Can I use j-link in ccs v4.1 to debug tms570ls20216?