Ethernet connect problem about ping use NDK

Hello Jingjiao

The description of the issue is too technically vague. Any useful information that we can provide in debugging the issue needs more concrete description of the same. Also you may want to check on TI-RTOS forum as well as NDK is involved.

Regards
Amit

Hello,
When I use the TI-RTOS tcp example program for tm4c129x,the network sometimes connected,sometimes failed to be connected.When I say connect here means use the "ping".
I doubt if the NDK on the TI-RTOS is not stable?

Hello Jingjiao,

We have tested the TCP example from TI-RTOS and it works fine even when the n/w breaks. Is there a proxy server on the n/w which is required to be configured?

Regards
Amit

Hello Amit,

Have you tested the example for several times?My experience is that if the ethernet led " active"  goes on first ,I can ping the ARM successfully.

My TI-RTOS verision is 1.21,CCS verison is 5.5,and I use the DK-TM4C129X development board.

And I'm sorry for thar what do you mean by n/w,where can I find how to configure it?

Thank you!

Hello,

      Thanks for that answer,I have solve this problem now with the new EMACSnow.c.

Hello Jingjiao

That is good news. All the best with your application. If there any issues I would suggest pinging on the TI-RTOS forum

Regards
Amit