Board is not able to re-assigned IP

Mayur Paithankar

Prodigy 170 points

We are using EK-TM4C1294XL Development Board for development with CCS version 6.0 and TivaWare_C_Series-2.1.0.12573.

We have connected board to router and got IP address and sending data to a server.

after some time router assigned new IP to board but new IP is not reflected on board.

it refreshed only after hardware reset and unplugged - plug ethernet cable of board

I have checked enet_weather and enet_io example.but stiil with this problem

I also tried to look into Exosite example but not able to find useful steps.

Can you please provide any guidance to check this?

Thanks,

over 10 years ago

0 Mayur Paithankar over 10 years ago

Prodigy 170 points

please help me ... its urgent . i stuck only because of this..

i am still working on library but not found any solutions.

is there any problem with merging IP address in ethernet client.c?

Thanks,

0 David Friedland over 10 years ago in reply to Mayur Paithankar

TI__Mastermind 18320 points

Mayur,

From your problem description, it doesn't appear that you are even using TI-RTOS. I went ahead and moved this thread over to the device forum in hopes that it will get a faster response there.

0 Amit Ashara over 10 years ago

TI__Guru**** 244400 points

Hello Mayur,

The qs_iot example in 2.1.1.71 TivaWare release checks for IP address reassignment.

Regards
Amit

Arm-based microcontrollers

Arm-based microcontrollers forum

Board is not able to re-assigned IP