UDP Compilation error

I am getting errors in compilation,can anybody help me ?

Hello Durgesh,

Can you please take a snapshot of the compilation error and then attach it to the post.

Regards
Amit

hello amit,

                  Thanks for ur reply,

Now I am using this project , it is compiling bur now working,plz help me.

Thankscc3000_basic_wifi_application.rar

Hello Durgesh,

Good that the compilation error is resolved, but then what is not working? I cannot debug a standard example code from TivaWare unless you provide the information on setup, changes made to the code, etc. Did you try to get the basic code working before you made changes to the code?

Regards
Amit

void sendUDP(void){

uint32_t socket_fd;

//UDP



struct ip_addr dstaddr;

struct ip_addr srcaddr;

struct udp_pcb * pcb;

u16_t * dst_port;

struct pbuf * pb;



char str[512]="Test Sender";

IP4_ADDR(&dstaddr,10,20,50,155); // time.windows.com

IP4_ADDR(&srcaddr,10,20,50,245); // cortex

dst_port = 250;





pcb = udp_new();



//RIT128x96x4Enable(1000000);

// RIT128x96x4StringDraw("UDP CONNECT", 45, 45, 15);



//udp_bind(pcb,&srcaddr,&dst_port);
udp_bind(pcb,&dstaddr,&dst_port);
//udp_connect(pcb,&dstaddr,&dst_port);



pb = pbuf_alloc(PBUF_TRANSPORT, 512, PBUF_REF);

pb->payload = str;

pb->len = pb->tot_len = 512;



while(1)
{
udp_sendto(pcb, &pb,&dstaddr,dst_port);
}

//udp_send(pcb, &pb);



//udp_recv(pcb, RecvUTPCallBack, NULL);



pbuf_free(pb);



udp_remove(pcb);
}


This is the udp code i am working on plz verify , I am getting problem while debugging in buffer size.

Thanks

Hello Durgesh,

What problem debugging the buffer size? Also which version of TivaWare are you using?

Regards
Amit