CMSIS DSP library, how to create a project?

Martin Valencia

Other Parts Discussed in Thread: HALCOGEN

good day, it is the first time I working with DSP (Cortex-R4) library, and I have many doubts about the way they work.

- Such libraries can be added to projects created in HalCoGen ?, if so is there any routing procedure to add libraries by CCsv6?

- Where there is some pdf that explains how to use or calculate the digital filters and Fourier?

regards Martin

over 8 years ago

0 Jean-Marc Mifsud over 8 years ago

TI__Mastermind 22375 points

Martin,

The CMSIS library are distributed as source and pre-compiled libraries.
If you use the pre-compiled libraries, just add them to your CCS project.

Concerning how to use CMSIS, I will recommend to search on the web. There is a lot of example.
ARM website is also the place to go. CMSIS DSP LIBRARY are developed by ARM.

For information:
mcuoneclipse.com/.../tutorial-using-the-arm-cmsis-library

0 Martin Valencia over 8 years ago in reply to Jean-Marc Mifsud

Guru 15175 points

thank you very much for your quick reply, but to be honest my knowledge CCSv6 are very basic, followed the steps of the website you sent me but not accomplish anything, I also found a PDF to configure some libraries but also not achieve anything.

the steps to add a library are really complicated and messy look.

0 Martin Valencia over 8 years ago in reply to Jean-Marc Mifsud

Guru 15175 points

maybe you can help with some screenshots of how to add DSP libraries to a project already created with HalCoGen and CCSv6 and I could create PDF and do some video tutorials and share them on the network, so would become more popular!