Equivalent Tivaware - StellarisWare

Mathieu L.

Other Parts Discussed in Thread: TM4C123GH6PGE

Hi,

I need to use the blackhawk JTAG debug probe.

I have a TM4C123GH6PGE, what is the stellarisware equivalent? Because when I see the new config for flashing, there isn t choice for TM4C devices.

over 10 years ago

0 Amit Ashara over 10 years ago

TI__Guru**** 244440 points

Hello Mathieu

BlackHawk has drivers for TM4C123. You do not need anything for StellarisWare

Regards
Amit

0 Mathieu L. over 10 years ago in reply to Amit Ashara

Expert 1630 points

Hello, I will be more precise: I use this model www.blackhawk-dsp.com/.../USB100v2ARM.aspx
The description say that you don't need specific driver but you only need code composer.

In code Composer, the device to choose in the config file is "Texas Instrument XDS1000v2 debug probe", right? Or the device I just mention only work for this probe www.blackhawk-dsp.com/.../usb100v2D.aspx

0 Amit Ashara over 10 years ago in reply to Mathieu L.

TI__Guru**** 244440 points

Hello Mathieu,

I went to the link and then selected show all devices and TM4C is available. What version of CCS are you using? Do note that I have used the exact same debugger for TM4C123 and TM4C129.

Regards
Amit

0 Mathieu L. over 10 years ago in reply to Amit Ashara

Expert 1630 points

Hi,

I manage to find the device I was looking for.

0 Amit Ashara over 10 years ago in reply to Mathieu L.

TI__Guru**** 244440 points

Hello Mathieu,

Enlighten us with what the issue finally was. May be someone will hit this thread in the future.

Regards
Amit

Arm-based microcontrollers

Arm-based microcontrollers forum

Equivalent Tivaware - StellarisWare