• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 203 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TEST- Pin is not connected to GND

Manfred Ehrenberg
Prodigy 20 points

Hello,

I have forgotten to connect the TEST- Pin to GND. Is there a work arround?

Best regards

Manfred

  • 0
    TI__Mastermind 49120 points
    Manfred,

    This pin has an internal pull-down, but we do still recommend for it to be grounded externally as it is very critical for this pin to not go high for correct operation of the part. There is no software workaround for this. I would recommend pulling this pin down either via a resistor or directly shorting to ground.

    Regards,
    Sunil