Hercules LP + ADC 5V?

thank you very much for your help, is going to be a little difficult to alter the Hadware.
greetings
Martin

Yes, the 0201 components are difficult to rework.
I have not been able to successfully pull one off and 'move' it - always had to have a new one to replace the one I pull off.
And this is with access to a good microscope and high end soldering iron.

You could consider not using a real resistor but just remove R3 and short across the R4 pads.

-Anthony

My first intention is to have some other channels 3.3v to 5v, but I see that if I remove the resistance, LP stay with 5v sensing forever and that is not good; I'll resort to method used attenuation amplifier with opam.

thank you very much for your guide Anthony.
greetings