How to create a startup_ccs.c file?

Gautam Bhat

Hi,

I have created a TI-RTOS empty project for the TM4C129x and I do not see the startup_ccs.c file? Should I be creating a file by myself?

Thanks,

Gautam.

over 10 years ago

0 Markel Robregado over 10 years ago

Guru 86755 points

Hi.

I have not done to create a TI-RTOS project for TM4C129x. But, when you create a new CCS project with correct MCU selected, the startup file will be generated.

- kel

0 Amit Ashara over 10 years ago

TI__Guru**** 244400 points

Hello Gautam,

No need to create a startup file for TI RTOS. It is part of the build environment in TI RTOS

Regards
Amit

0 Gautam Bhat over 10 years ago in reply to Amit Ashara

Expert 1275 points

If I want to configure the Interrupt handlers should I do a HWI_Create(..) then? I am trying to add a Timer 0 interrupt handler but it says that the interrupt handler is already being used.

0 Amit Ashara over 10 years ago in reply to Gautam Bhat

TI__Guru**** 244400 points

Hello Gautam

Yes, HWI_Create is the routine to use. The Timer 0 may be used for System Tasks. Did you check another timer?

Regards
Amit

Arm-based microcontrollers

Arm-based microcontrollers forum

How to create a startup_ccs.c file?