reading feedback using qei and perform action

JUNAID RANA

i am using pololu 29:1 gear encoder motor and want to read feedback and calculate distance and control speed using QEI ... kindly help me out

over 10 years ago

0 Amit Ashara over 10 years ago

TI__Guru**** 244400 points

Hello Junaid

Please search the forum for code examples for QEI or posts on QEI. We do not post code, but if users have got code working, then it must be on the forum as reference for others.

Regards
Amit

0 cb1 over 10 years ago

Guru 47900 points

You've not told us which MCU you're using AND - just when - your (homework) is due...

Might (both) "Help us out?"

0 JUNAID RANA over 9 years ago in reply to cb1

Prodigy 40 points

I am using tm4c123

0 Amit Ashara over 9 years ago in reply to JUNAID RANA

TI__Guru**** 244400 points

Hello Junaid

OK. Did you look at the qei example in the TivaWare first?

Regards
Amit

0 cb1 over 9 years ago in reply to Amit Ashara

Guru 47900 points

We note poster's (4 word) response required (almost) 2 months...

Arm-based microcontrollers

Arm-based microcontrollers forum

reading feedback using qei and perform action