HET IDE of functional safety correspondence

kata

Prodigy 60 points

Hello

My name is Ayumu Kataoka.

I use the HET as safety-related input.

In order to process the special pulse, you have to generate the microcode in the HET IDE.

Do not have a HET IDE of functional safety correspondence?

Like SAFETI-HALCOGEN-CSP.

Best regards.

over 10 years ago

0 Karl Wallinger over 10 years ago

TI__Genius 16410 points

Hello Kataoka-san,

Let me move this to the Hercules Microcontroller forum, since I believe they can best answer your question.

Regards,
Karl

0 Anthony F. Seely over 10 years ago in reply to Karl Wallinger

TI__Guru 69070 points

Hi Kataoka,

No, we do not have a qualification or certification package available for the HET IDE.
Nor was it developed with a safety software process.

Best Regards,
Anthony

0 kata over 10 years ago in reply to Anthony F. Seely

Prodigy 60 points

Hi Anthony.

I'm Kataoka.

Thank you for your reply.

Do you have CSP release plans about the HET?

Best Regards.

0 Anthony F. Seely over 10 years ago in reply to kata

TI__Guru 69070 points

Hi Kataoko,

We currently have no plans for a CSP for the HET IDE.
In fact I don't think we've even discussed what it would look like.

Best Regards,
Anthony

0 kata over 10 years ago in reply to Anthony F. Seely

Prodigy 60 points

Hi Anthony.

I'm Kataoka.

Thank you for your reply.

We are a functional safety development.
Input pulse to the HET is a safety signal.

Please teach how to use the HET IDE in this project.

I think,
1. Validate the HET IDE in our own
or
2. Check the HET IDE generated microcode
I try to do the latter.
In detail,
To make sure that the register read value is correct with respect to the pulse input.

Comments please.
Please teach the viewpoints and checkpoints.

Best Regards.

0 Anthony F. Seely over 10 years ago in reply to kata

TI__Guru 69070 points

Hi Kataoka,

I think you could use the eCAP to check the N2HET capture code against,

we have several devices with both modules. They are very different in design as one is dedicated

hardware (ecap) and the other is a programmable timer.

I would do this on hardware (silicon) since the model that is underlying the HET IDE is a "C" model and
may have subtle differences compared to the actual silicon.

Best Regards,

Anthony

0 kata over 10 years ago in reply to Anthony F. Seely

Prodigy 60 points

Hi Anthony.

I'm Kataoka.

Thank you for your reply.

It became very helpful.
close the question.

Thank you.

Arm-based microcontrollers

Arm-based microcontrollers forum

HET IDE of functional safety correspondence