XDS110 configuration file for GDB nad TMS570LC4357

Jiri,

Is this .dat file the same .dat file type that's generated by CCS automatically when you initiate a debug session?
If so should be easy to get you one.

Best Regards,
Anthony

Hello Sunil,

thanks for the configuration file. It looks correct, but it is not work:

c:\ti\ccsv6\ccs_base\common\uscif\gdb_agent_console TMS570LC4357-XDS110.dat
Successfully configured TMS570LC4357-XDS110.dat
CPU Name             Port
--------             ----
cortexr5            :55000

Starting all cores
CPU Name             Status
--------             ------
cortexr5             Waiting for client
cortexr5             Client connected...Connecting to Target
FAILED! GTI_CONNECT(hpid=002E04C0)=-1
(Error -6306) Failed to connect to PRSC module.
(Emulation package 6.0.14.6)

Connection failed...exiting

What this mean? Any idea?

Jiri

Hello Anthony,
no, it isn't easy. We don't using/have CCS.

PS: CCS is probably secret SW. Any link to download is terminated on URL downloads.ti.com/.../ or downloads.ti.com/.../
And both URLs have only this content:
File not found."
Nice.

After firmware update it works fine. Thanks!

Hi Jiri,

Also see - e2e.ti.com/.../458526.

There is a patch specific to the two cached cortex R5 parts - I'm not sure how this would come if you don't have CCS installed as it's distributed through the CCS update system.

Edit:

In an updated CCS install, two of the three files that are updated will appear here:  (the third is for the XDS200 and it's in a different folder).   If you're using XDS110 you would want the updated file highlighted in the figure below.   It's got a date stamp later than the other files in the same directory - maybe you can check your GDB server install this way to see if you've got the updated  'tixds510cortexR.dvr'   file ...   [nb: it's name is 510, but the xds110 also uses this driver...]