More than 16 endpoints in USB

morizzo

Intellectual 390 points

Does anybody know if up to 32 endpoints are available in USB among TM4C class MPU?

Stellaris does, but it seems TM4C does NOT.

Is this correct?

Or, any future plan to add a TM4C product that equips more endpoints?

Thank you

over 10 years ago

0 Amit Ashara over 10 years ago

TI__Guru**** 244440 points

Hello Morizzo

No. 16 is the maximum number of endpoints on the USB OTG controller in TM4C. As of now there are no plans to go above 16 endpoints.

Regards
Amit

0 morizzo over 10 years ago in reply to Amit Ashara

Intellectual 390 points

Hello Amit,

Thanks for your answer.

I am sorry that none of TM4C have 32 endpoints.
I am working on a project that requires endpoint number #8 or later. So it seems that TM4C does not meet the requirement.

Thanks,

0 morizzo over 10 years ago in reply to Amit Ashara

Intellectual 390 points

Hello Amit,

Thanks for your answer.

I am sorry that none of TM4C have 32 endpoints.

I am working on a project that requires endpoint number #8 or later. So it seems that TM4C does not meet the requirement.

Thanks,

0 Amit Ashara over 10 years ago in reply to morizzo

TI__Guru**** 244440 points

Hello Morizzo,

Sure I can understand that. One size does not fit all.

Regards
Amit

Arm-based microcontrollers

Arm-based microcontrollers forum

More than 16 endpoints in USB