interrupt using Switches in Tiva

Sajad Rather4

Dear Sir

i want to interrupt the blinking of LED(Green) with a switch so that it can Stop blinking Green light and should blink Red or Blue when we press the Switch.

over 10 years ago

0 cb1_mobile over 10 years ago

Guru 117855 points

And your idea is.... ....?

Review of the many example programs - which include your board - its switches and Leds - is a good place to begin - is it not?

We know not your board - your MCU - nor the effort you've made to achieve your goal.

0 Petrei over 10 years ago

Guru 26105 points

Hi,

One more addtion to what cb1_mobile said: please read and understand this link before writing anything else:

Arm-based microcontrollers

Arm-based microcontrollers forum

interrupt using Switches in Tiva