• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 1293 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Flash Tiva C-series launchpad ICDI firmware through another Tiva C-series.

sudesh kumar
Prodigy 10 points

Hello ,

After updating Tiva launchpad ICDI firmware PC is not detecting the board.I think firmware got broken.

I have another Tiva board which is working fine, I would like to know Is it possible to flash the ICDI firmware from another board?

Thanks!

  • 0
    TI__Guru**** 244450 points
    Hello Sudesh,

    Yes, it is possible to flash one LaunchPad from the ICDI of another LaunchPad. The instructions below is with the EK-TM4C123G

    On the programmer LaunchPad, make sure the the MCU VDD switch is removed and on the Target LaunchPad the EXTDBG pin in the centre set of headers is connected to GND.

    Also do ensure that the GND between the 2 boards is connected as well.

    Regards
    Amit