Driverlib recompile with GCC

Trampas Stern

I would like to use the driverlib with GCC and floating point hardware support. Is there instructions on how to recompile the driverlib with hardware floating point support using GCC?

over 10 years ago

0 Amit Ashara over 10 years ago

TI__Guru**** 244400 points

Hello Trampass,

Are you using CCS's GCC compiler?

Regards
Amit

0 Trampas Stern over 10 years ago in reply to Amit Ashara

Prodigy 235 points

Yes

0 Amit Ashara over 10 years ago in reply to Trampas Stern

TI__Guru**** 244400 points

Hello Trampass

The flags are defined in D:\ti\TivaWare_C_Series-2.1.1.71\makedefs file.

The following image snapshot of different windows would be useful in checking for the settings.

Regards

Amit

Arm-based microcontrollers

Arm-based microcontrollers forum

Driverlib recompile with GCC