Transfer the program program from CCS to TMS57012 to use it in my own board

Issam mrabou

Other Parts Discussed in Thread: LAUNCHXL2-TMS57012

Hi,

I'm a beginner and I want to know when I finish all tests in the LAUNCHXL2-TMS57012, how could I Transfer the program program from CCS to my own TMS57012 to use it in my own board ?? thanks in advance

over 9 years ago

0 Anthony F. Seely over 9 years ago

TI__Guru 68950 points

Issam,

You will need a JTAG tool like the XDS100v2 to program the TMS57012 on your own board. (A JTAG tool is built into the LAUNCHXL2-TMS57012 so it is there already).

Other than this - it's the same. You use the JTAG tool to connect to your TMS570122x then download the program you want to run onto it.