gps interface

basawaraj talawar

Prodigy 210 points

hello,

I want to read gps data lattitude and longitude using UART0 please suggest me helpful ideas thanks for ur help

over 9 years ago

0 Amit Ashara over 9 years ago

TI__Guru**** 244440 points

Hello Basawaraj

Did you check the forum for similar GPS posts?

Regards
Amit

0 basawaraj talawar over 9 years ago in reply to Amit Ashara

Prodigy 210 points

i checked but their is no proper posts

0 f. m. over 9 years ago in reply to basawaraj talawar

Guru 11940 points

i checked but their is no proper posts

GPS processing (assuming you are referring to NMEA 183) is basic string parsing, and as such independent of "UART0" or any underlying hardware at all.

There are plenty of C language examples around, just don't restrict yourself to TM4C for your search. However, this hardly qualifies that question for this specific forum ...

0 Amit Ashara over 9 years ago in reply to basawaraj talawar

TI__Guru**** 244440 points

Hello Basawaraj,

I used the string "GPS" in the search at the top of the forum

e2e.ti.com/.../418196
e2e.ti.com/.../1623939

And the list goes on...

Regards
Amit

Arm-based microcontrollers

Arm-based microcontrollers forum

gps interface