Steps for Configuring RTC in Hibernate Calendar mode

Vibha Singh

Other Parts Discussed in Thread: TM4C1294KCPDT, EK-TM4C1294XL

Hello,

I am Currently Working on TM4C1294KCPDT ,I want to configure RTC in Hibernate Calendar mode.

My requirement is Timing,Date and year Even if my power is off so that whenever i will start the board it should not retain the Initial Value or last stored.

It should Continue with its counting independent of power.

Can you Please Help me with Correct Steps in Configuring Above requirement ?

Thanks,

Vibha

over 9 years ago

0 Evan W over 9 years ago

TI__Mastermind 40610 points

Vibha,

I have moved your post to the TM4C thread to better assist you with your question. Thanks for your support of TI!

0 Amit Ashara over 9 years ago

TI__Guru**** 244440 points

Hello Vibha

Did you look at the example in TivaWare

D:\ti\TivaWare_C_Series-2.1.2.111\examples\boards\ek-tm4c1294xl\hibernate

Regards
Amit

0 Sai Reddy over 9 years ago

TI__Mastermind 22640 points

Hello Vibha,

You have posted the same question on another post here: e2e.ti.com/.../490750

I already posted an answer there. Please avoid posting same question on multiple threads. It wastes the time of the forum members and delays the response time.

Thanks,
Sai

Arm-based microcontrollers

Arm-based microcontrollers forum

Steps for Configuring RTC in Hibernate Calendar mode