SOFTWARE INTERRUPT IN TM4C123GH6PM

Ramasubbu Venkatachalam

Other Parts Discussed in Thread: TM4C123GH6PM

Hello everyone,

I am using tm4c123gh6pm. i just want to know how to generate the software interrupt and configure the callback(handler)function for that interrupt..

over 9 years ago

0 Amit Ashara over 9 years ago

TI__Guru**** 244440 points

Hello Rama

You may use the IntTrigger API call to software trigger an interrupt. The corresponding Interrupt Handler in the vector table needs to be written accordingly.

Regards
Amit

0 Ramasubbu Venkatachalam over 9 years ago in reply to Amit Ashara

Prodigy 180 points

Hello amit,
thank you...

0 cb1 over 9 years ago in reply to Ramasubbu Venkatachalam

Guru 47900 points

Note too - that unlike HW triggered interrupts - you do not have to "clear" the Software Interrupt.

Arm-based microcontrollers

Arm-based microcontrollers forum

SOFTWARE INTERRUPT IN TM4C123GH6PM