Link for wifi_node_ap_tirtos code

Parveen Dhiman

Prodigy 200 points

Can anyone please send me the link of wifi_node_ap_tirtos code to download?

As it says in the link http://www.ti.com/lit/ug/tidu992/tidu992.pdf

over 10 years ago

0 Amit Ashara over 10 years ago

TI__Guru**** 244440 points

Hello Parveen,

It is under software on the TI Design web page

www.ti.com/.../tidcak5

Regards
Amit

0 Parveen Dhiman over 10 years ago in reply to Amit Ashara

Prodigy 200 points

Hi Amit,

Thank you for the response.

i had checked the link which you have sent,but i don't see any files relating to it.,as it has stepper motor file for TM4C123 devices.

There are no codes for TM4C129 devices.it would be better if you could check the link once.

0 Amit Ashara over 10 years ago in reply to Parveen Dhiman

TI__Guru**** 244440 points

Hello Parveen

Most of the code should work for TM4C129x devices. Please refer to the Application Note link below on porting from TM4C123x to TM4C129x.

www.ti.com/.../spma065.pdf

Regards
Amit

0 Chuck Davenport over 10 years ago in reply to Parveen Dhiman

TI__Guru 59540 points

Hello Praveen,

There was an issue identified with the file pointed by the link provided above. The wrong code/installer was loaded into the zip file. As you the code loaded was targeted at a TM4C123 Stepper Motor application rather than a simple TM4C129 based WiFi Access Point/Node. This has now been corrected and the code in the zip file has been correctly loaded for the TI Design. Please try to download the code again and let us know if you have any additional questions.

Arm-based microcontrollers

Arm-based microcontrollers forum

Link for wifi_node_ap_tirtos code