• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 1279 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TM4C1294NCPDT ethernet firmware flash question

Ashley Kao
Intellectual 360 points
Other Parts Discussed in Thread: TM4C1294NCPDT, EK-TM4C1294XL

1. Can I firmware upgrade using TCP/IP on TM4C1294NCPDT ,
if the chip has the function, can you provide sample code,thanks.

2. How to use the ethernet to do the FW Upgrade on TM4C1294NCPDT?
Is there any sample code or document for reference?

thanks

Ashley

  • 0
    TI__Guru**** 244400 points
    Hello Ashley,

    The TivaWare has boot_emac_flash example which shows how to perform Firmware Upgrade over Ethernet. The same example must be ported over to the TM4C1294NCPDT device after making changes to the application code for removing the Graphics as the EK-TM4C1294XL does not have a Display panel.

    Also the forum has a post on the same, where I had helped another forum user on the same topic. May be a forum search is suggested!!!

    Regards
    Amit