• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 32 subscribers
  • Views 1305 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SCI RECEIVE PROBLEM ON LAUNCHXL2-RM46

shruthi v
Intellectual 435 points

Other Parts Discussed in Thread: LAUNCHXL2-RM46

Hi,


I am working on SCI module OF launchxl2-rm46 and use the code and instructions described in this link ,but not able to see any data being received in my terminal. Can anyone help me out with this.

Thank you

Shruthi

  • 0
    TI__Guru**** 191886 points
    Hi Shruthi,
    Have you configured the COM port of your PC the same setting as the microcontroller, i.e. baudrate, data length, parity, number of stop bits?

    Please also use the scope to monitor RX pin? If you are not seeing anything when you press a keystroke then it is the PC side that is not sending the data to the micrcontroller.
  • 0 in reply to Charles Tsai
    TI__Guru 69070 points
    Pretty certain that the SCI used on the HDK for USB<>Serial and the SCI that is used on the RM46 launchpad is not the same.
    The video was made for the HDK I think.

    Try using the other SCI port instead of the one listed in the video.

    The last time I used the SCI on the RM46 launchpad it was the sci corresponding to "scilinREG" that worked.

    I think this is probably SCI2 but check.

    -Anthony
  • 0 in reply to Anthony F. Seely
    TI__Guru**** 191886 points
    Hi Shruthi,
    You have another new post regarding the same topic for which I have answered today. Can you please close this post by clicking the 'Verify Answer' button? Thanks.