Using XDS200 with EK-TM4C129EXL to view Trace Analyzer

David Townzen

Other Parts Discussed in Thread: EK-TM4C129EXL, TM4C129ENCPDT

I want to use the XDS200 emulator connected to the EK-TM4C129EXL board and view the instructions which executed immediately prior to a breakpoint. I have tried to follow the instructions, but have had no success. Help!

CCS version 6.1.2.00015

TI Emulators version 6.0.14.5

over 9 years ago

0 Amit Ashara over 9 years ago

TI__Guru**** 244400 points

Hello David

CCS does not support Trace for Cortex M devices.

Regards
Amit

0 David Townzen over 9 years ago

Prodigy 85 points

What support, if any, is there for the Embedded Trace Macrocell feature of the TM4C129ENCPDT device?

0 Amit Ashara over 9 years ago in reply to David Townzen

TI__Guru**** 244400 points

Hello David

The ETM has been tested with Keil and the support files for IAR Studio+ J Trace are under works

Regards
Amit

Arm-based microcontrollers

Arm-based microcontrollers forum

Using XDS200 with EK-TM4C129EXL to view Trace Analyzer