Interfacing TM4C123G with IMU

Islam Elnady

Hi,

Is there any good tutorials about configuring the I2C modules for interfacing the launchpad tm4c123g with a 6DOF IMU (GY-521 MPU6050) ?

over 9 years ago

0 Sai Reddy over 9 years ago

TI__Mastermind 22580 points

Hello Islam,

The following App Note is a good a resource on I2C peripheral on TM4C12x devices: www.ti.com/.../spma073.pdf

We don't have an example that interfaces with the device that you are interested in, but the above mentioned App Note (along with the project collateral) explains the basics of interfacing an I2C slave to the TM4C MCU.

Thanks,
Sai

0 Islam Elnady over 9 years ago in reply to Sai Reddy

Intellectual 340 points

Hello Sai,
Thanks for the App Note. I'm currently utilizing DRM and have no background knowledge about API. Is there anything in DRM instead ?

Regards,
Islam

0 Sai Reddy over 9 years ago in reply to Islam Elnady

TI__Mastermind 22580 points

Hello Islam,

Please read Tip#2 in this forum post: e2e.ti.com/.../374640

We don't have any examples using DRMs, due to the various reasons stated in the above forum post.

Thanks,
Sai

Arm-based microcontrollers

Arm-based microcontrollers forum

Interfacing TM4C123G with IMU