• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 30 subscribers
  • Views 623 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Tiva C Connected Launchpad enet_io empty response

Barış Yener
Prodigy 80 points
Other Parts Discussed in Thread: EK-TM4C1294XL

I have tried enet_io but browser says empty response from server. I used ip adress that board told me from UART. 

When i tried enet_lwip it works perfectly. I did not changed any codes. What should i do ?

Thanks for your interest.

Barış Yener

  • 0
    TI__Guru 59540 points
    Hello Barış,

    Can you prvide more information on how you have connected the launchpad to your network? i.e., is there any special proxy information that must be used in order for the device to gain access to your network? Also, were you able to successfully "compile"/translate the HTML to the .h file using the provided utility?
  • 0 in reply to Chuck Davenport
    Prodigy 80 points
    Hello Chuck,

    Board model is ek-tm4c1294xl
    Connected with Ethernet cable.
    In serial monitor board gives me IP address to connect via web browser.
    In browser side browser says "Empty Response" with an error page. (Not the HTML response from board)

    I have tried today it worked . I don not know where i did mistake. Thanks for your reply .

    Regards,
    Barış Yener
  • 0 in reply to Barış Yener
    TI__Guru 59540 points
    Hello Barış ,

    I am glad you were able to get the setup working. Let us know if you encounter any additional problems.