Flexray example for TMS570LS1115

You could try the project on this page: processors.wiki.ti.com/.../TMS570LS31x_HDK_Kit
The 1115 is a subset of the 3137 .. should run the same code as long as you do not use more flash & sram than it has.

Worst case you should be able to go into HalCoGen and regenerate startup code for the 1115 and merge with this example.

Thank you for the link. I have built and downloaded the firmware to my boards.

But still I cannot get anything working. I checked the flexray pins using a scope to see any bus activity. Even I cannot see any pin activity in those signals.

I was just wondering whether I need to configure the transceiver chip too. But the example code has no such code.

As I know, there are no pin configuration for Flexray as those pins are not muxed. Therefore I am pulling my hair at the moment. Can you give me any tips?

Sorry I've not tried FlexRay myself. One of my colleagues has - I can ask.

TJA transceiver isn't a TI device - so can't tell you where to go for info about it.

By the way - did you add the TJA yourself on a daughterboard? I don't think we have a FlexRay transceiver at all on the HDK just CAN...