How to install other supported components in CCS

Peter Erasmus

Other Parts Discussed in Thread: CC1310

Dear All

I have CCS installed and working with the TMS570 however during installation of CCS I only selected Hercules to be supported now I am starting with the Launchpad simple link with CC1310 how can I upgrade CCS to support also the Wireless devices

Sorry if I am asking this in the wrong form

over 9 years ago

0 Charles Tsai over 9 years ago

TI__Guru**** 191296 points

Hi Peter,
I think what you need is to run the CCS installer again and point it to the directory you installed CCS in. This will allow you to add components.

0 Peter Erasmus over 9 years ago

Intellectual 565 points

Dear Charles
Thank you very much for the help much appreciated

0 Charles Tsai over 9 years ago in reply to Peter Erasmus

TI__Guru**** 191296 points

Hi Peter,
If you run into any CCS install issue please open a new post in the CCS forum at e2e.ti.com/.../ or I can move the post for you.

Arm-based microcontrollers

Arm-based microcontrollers forum

How to install other supported components in CCS