ETHERNET CODE FOR TMS570LC43X HDK

koteswari p

Other Parts Discussed in Thread: HALCOGEN

Hi All..

I am using TMS570LC43X HDK . The demo software does not contain the code for the Ethernet . If any one is having the Ethernet code, please provide the link to download .

Thanks in Advance,

Koteswari P

over 9 years ago

0 Charles Tsai over 9 years ago

TI__Guru**** 191906 points

Hello Koteswari,
The only Ethernet example we have for LC43x can be found at this wiki page.

processors.wiki.ti.com/.../HALCoGen_Ethernet_Driver_and_lwIP_Integration_Demonstration

0 koteswari p over 9 years ago in reply to Charles Tsai

Prodigy 130 points

thanks for the reply...

i tried with the HALCOGEN ETHERNET DRIVER AND LWIP DEMONSTRATION link also.But it is not working on TMS570 HDK.

Tell me the proper settings i need to do for the workable code.

0 Anthony F. Seely over 9 years ago in reply to koteswari p

TI__Guru 68950 points

It works if you pick the correct folder to match the board you are using. There are multiple project folders in the example installer.
Also you need to make sure that you have S2 set to enable ethernet on the HDK. The default settings of this switch would route the ethernet signals to the board-board headers and not to the PHY.