TMS570LS1227 FEE format

唐旗

Other Parts Discussed in Thread: HALCOGEN

During using HALCoGen to test fee driver,when i config the virtual sector as below,i can format the block by using TI_Fee_format（）

but if i config the virtual sector as below,i can not format the block by using TI_Fee_format（), by use ccs 6.1 debug tool ,I can see the sector data by view memory

so i do not know why i can not format the block.

over 9 years ago

0 Bob Crosby over 9 years ago

TI__Guru 72500 points

I thought this was going to be easy, but I am also having trouble getting stuck in Fee_Init(). I have forwarded sample code the FEE expert.

0 Vishwanath Reddy over 9 years ago in reply to Bob Crosby

TI__Mastermind 19365 points

Hi,

I tried out your configuration and found that a bug exists in format API. It does not erase a physical sector, if multiple sectors are combined to form a virtual sector. As a temporary fix, I have attached a solution. I will raise CQ ticket and fix it in next HALCoGen release.

3223.ti_fee_format.c

0 唐旗 over 9 years ago in reply to Vishwanath Reddy

Prodigy 120 points

Thanks, problem solved

Arm-based microcontrollers

Arm-based microcontrollers forum

TMS570LS1227 FEE format