EK-TM4C129-XL Eagle CAD Library

Hello Victor,

The design is in Mentor Graphics PADs and not Eagle CAD.

Regards
Amit

Hello Amit

I ask because the web site processors.wiki.ti.com/.../Tiva_C_Series_TM4C1294_LaunchPad states

Hardware Design Files
File:EK-TM4C1294XL REV D Design Package.zip
Complete design package including bill of materials, gerbers and Eagle CAD files. Eagle 6.5.0 was used for this project.

Perhaps an output to Eagle format was provided for this package and thus no library?

Thank you

Hello Victor,

Neither could I find the .lbr in the package either. Does the project open in Eagle?

Regards
Amit

Hello Amit,

It opens with no problems. I can cut and paste an EK schematic for a specific solution, e.g. Ethernet, to my project. Foot prints are there in the board layout. It might be a zip packaging over-site since the library is held in a separate folder. Or it could be a copy-write issue with Mentor if their design pads were used in the library.

Thanks,
Victor