TM4C1294XL uip server and client

Barış Yener

Other Parts Discussed in Thread: EK-TM4C1294XL

Hello,

I have been using enet_uip ( as a web server ) example for my board. It works very well but i want to send HTTP request to another website.

It dont need to be works on same time. Server side can be paused while Tiva C is sending request to another website. How can i make this ?

Thanks,

Barış Yener

over 9 years ago

0 Amit Ashara over 9 years ago

TI__Guru**** 244400 points

Hello Bans

Do you mean you want to have a server and client at the same time?

Regards
Amit

0 Barış Yener over 9 years ago in reply to Amit Ashara

Prodigy 80 points

Yes, exactly.

Also it don't need to be based on uIP.

0 Sai Reddy over 9 years ago in reply to Barış Yener

TI__Mastermind 22580 points

Hello Baris,

Can you run you web server on a different port (other than port 80)? If so, then it will be lot simpler as you have one connection (to the webserver) on Port 80 and another connection (hosting webserver) on a different port.

If you want to run both on Port 80 then it might be lot more complicated.

I would recommend moving to lwIP as it has more features, and in many cases faster than uIP. But lwIP takes up more flash. So you will have to see what works best for you.

Thanks,
Sai

0 Barış Yener over 9 years ago in reply to Sai Reddy

Prodigy 80 points

Is there any example about that ?
Working both of it same time ?

0 Sai Reddy over 9 years ago in reply to Barış Yener

TI__Mastermind 22580 points

No we don't have an example that acts as HTTP server and HTTP client at the same time.

But we have an example that acts as a HTTP server and a UDP server at the same time. Look at the "enet_io" example in the folder "./examples/boards/ek-tm4c1294xl" of TivaWare.

Thanks,
Sai

Arm-based microcontrollers

Arm-based microcontrollers forum

TM4C1294XL uip server and client