Develop GUI for my TM4C1294 based applicaion

HAROON AHMED14

Hello !

I want to develop GUI for my DATA ACQUSIITON based application, i am using TI-RTOS on my Launchpad , i wanna interconnect LCD interface on which nice GUI is supposed to be available for certain options to set the parameters like sampling frequency fs on LCD touch interface. My question is what i choose to develope the GUI either Qt or some else ? what would be the best solution to my problem.

Reagrds

haroon Ahmed

over 9 years ago

0 Amit Ashara over 9 years ago

TI__Guru**** 244400 points

Hello Haroon

I am not sure if anyone has tried it in TI RTOS environment. Most users that I know of use it in a bare metal system. There is no emulator for the GUI development, but more by construct.

Regards
Amit

0 HAROON AHMED14 over 9 years ago in reply to Amit Ashara

Prodigy 195 points

thanks for reply.

Should i switch to other or newer version of MCU of TI for which i can develope GUI based on LCD touch interface for my application?

0 Amit Ashara over 9 years ago in reply to HAROON AHMED14

TI__Guru**** 244400 points

Hello Haroon,

I am not sure why you want to switch. TM4C12x devices support LCD with resistive touch. The only limitation is that it has not been done within TI RTOS framework. There is a freertos example on how to add graphics for DK-TM4C129x.

Regards
Amit

0 HAROON AHMED14 over 9 years ago in reply to Amit Ashara

Prodigy 195 points

thanks for suggesting me a nice solution. One thing left that i want to ask , Can't we develop GUI using CCS GUI composer ? if not , only solution to do this is by using graphics driver library based on constructs leads to complicated solution.

Regards
haroon

0 Amit Ashara over 9 years ago in reply to HAROON AHMED14

TI__Guru**** 244400 points

Hello Haroon,

No, CCS GUI composer is not meant for grlib development. It may seem daunting to develop on constructs, but if use an existing framework, it would be way easier.

Regards
Amit

Arm-based microcontrollers

Arm-based microcontrollers forum

Develop GUI for my TM4C1294 based applicaion