EK-TM4C129XL Design File Schematics

Victor L-S

Other Parts Discussed in Thread: EK-TM4C1294XL

Hello,

EK-TM4C1294XL REV D Schematic.pdf has the capacitors coming off VDDC named C4, C14, C15. This matches the hardware.

EK-TM4C1294XL REV D.sch has the capacitors coming off VDDC0/1 named C5, C6, C7. Does this need correction?

Thanks

0 Amit Ashara over 9 years ago

Hello Victor

C5, C6 and C7 are for the TM4C123xH6PMI device which works as the ICDI

Regards
Amit

0 Victor L-S over 9 years ago

Ooops...my error! Was looking at the debug circuit!

0 Amit Ashara over 9 years ago in reply to Victor L-S

Hello Victor,

No problems.

Regards
Amit

0 Victor L-S over 9 years ago in reply to Amit Ashara

Hello Amit,

Can you delete this whole question chain?

Thanks,

Victor

0 Amit Ashara over 9 years ago in reply to Victor L-S

Hello Victor,

We normally do that for spam and offensive post (and yours does not qualify :-))

Regards
Amit

Arm-based microcontrollers forum