TM4C123G Reset Vector Address Value

Jame shin

Expert 2950 points

Hello

i'm use DK-TM4C123G development kit and SW version "TivaWare_C_Series-2.1.2.111"

i have a question

what is reset vector address value ?

thanks

over 9 years ago

0 Amit Ashara over 9 years ago

TI__Guru**** 244410 points

Hello Jame

At power up the reset vector is always 0x0

Regards
Amit

0 Jame shin over 9 years ago in reply to Amit Ashara

Expert 2950 points

Hello Amit

In the case of embedded processors
Boot Loader is Set peripherals and jump to the reset vector into the DDR RAM area.
Tiva C Microcontroller what is structure, So I asked.

thanks

0 Amit Ashara over 9 years ago in reply to Jame shin

TI__Guru**** 244410 points

Hello Jame

This is described partially in the boot loader user guide and internal memory section of the data sheets. The process is described in the Serial boot Loader application note which I have already sent to you in the other forum post

Regards
Amit

Arm-based microcontrollers

Arm-based microcontrollers forum

TM4C123G Reset Vector Address Value