boot_eth

Moving this thread to the TM4C forum. The LM3S9B90 is an obsolete product, so support may be limited.

Hello,

As pointed out before, LM3S9B90 is an obsolete product. If you are using it for new design you will run into the problem as these devices are not available for production. Please consider moving to TM4C devices. The link to TM4C devices is www.ti.com/tm4c.

The link for the last version of StellarisWare is: http://www.ti.com/tool/SW-LM3S

Thanks,
Sai

hello Sai

Thank you for you reply,I had get the boot_eth and boot_demo_eth，but i have some question,First,i use the ccs6.1,and i compiler the boot_eth and download it to LM3S9B90 by JTAG,The FLASH address is 0x00000000，second ，i compiler the boot_demo_eth and download it by JTAG at the address 0x00001800,Third,i use the LM FLASH Programmer to to down a bin file by ethernet;

This is what i have done,but it does not work ,can you give me some advice?thank you .