LM3S1621 boot loader .map file

Shinji Ueda

Expert 5440 points

Hi champs,

I'm looking for LM3S1621's boot loader .map file.

I could find "boot_loader" at StellarisWare.

But I cannot find .map file.

I need the map of the ROM written on an actual device.

Could you send it to me?

Regards,

Shinji Ueda

over 9 years ago

0 Amit Ashara over 9 years ago

TI__Guru**** 244400 points

Hello Shinji-san

The map file shall be generated only on compilation.

Regards
Amit

0 Shinji Ueda over 9 years ago in reply to Amit Ashara

TI__Expert 5440 points

Hi Amit-san,

Thank you for your reply.

OK. Could you teach me about "Compiler version and Checked OPTION" at this ROM.

Regards,

Shinji Ueda

0 Amit Ashara over 9 years ago in reply to Shinji Ueda

TI__Guru**** 244400 points

Hello Shinji-san,

I am not sure what you mean by "compiler version and checked option"?

Regards,
Amit

0 Shinji Ueda over 9 years ago in reply to Amit Ashara

TI__Expert 5440 points

Amit-san,

I think when it make ROM code, you make project, write C or ASM code and build your project.
If you used CCS, Could you teach me CGTools version that you use, and teach me that you check option on the project.
If you have the project that LM3S1621 device use now, could you send it to me?

I want to get ROM image file and map file.

Regards,
Shinji Ueda

0 Amit Ashara over 9 years ago in reply to Shinji Ueda

TI__Guru**** 244400 points

Hello Shinji-san

Projects for LM3S devices can be downloaded with the last StellarisWare release from the following link

http://www.ti.com/tool/sw-lm3s

Regards
Amit

Arm-based microcontrollers

Arm-based microcontrollers forum

LM3S1621 boot loader .map file