• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 279 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CAN Communication between two TM4C129EXL

SRINIVASAN M
Prodigy 180 points

I wish to work on sending a data from one EK TM4C129EXL to another EK TM4C129EXL.. I went through the references and found example with booster packs only . But I wish to perform a simple CAN Communication between two TM4c129EXL boards.. What should I refer to ? I could not find any such code to learn this. 

Please help

  • 0
    TI__Guru**** 244380 points
    Hello Srinivasan,

    You may use the CAN example in DK-TM4C123G as a starting point for CAN controller configuration. Also you would need a CAN transceiver to allow the controllers to communicate. I do not see any reference to the latter in your post.

    Regards
    Amit