Hercules Safety MCU Demos how to connect to my launchpad with my program

PEDRO HENRIQUE KAPPLER FORNARI

I want to use Hercules Safety MCU Demos software to test my code and some features. But all I get is that no boards were found.

Did someone have the same problem? Or know how to fix it?

I cannot find any configuration to specify my board.

Thanks.

over 9 years ago

0 Bob Crosby over 9 years ago

TI__Guru 72500 points

The Hercules Safety MCU demos are designed to be run on a PC in conjunction with either a Hercules USB Development Sick or a Hercules Development Kit (HDK).

0 PEDRO HENRIQUE KAPPLER FORNARI over 9 years ago in reply to Bob Crosby

Prodigy 140 points

Yes, I'm using a RM57l48 launchpad, connected by USB, which is recognized by Code Composer Studio but not by Hercules Safety Demos.

I don't understand what is happening.

0 Anthony F. Seely over 9 years ago in reply to PEDRO HENRIQUE KAPPLER FORNARI

TI__Guru 69070 points

Pedro,

The RM57L Launchpad is not supported by the safety demo GUI. There is a different out of the box demo.
See processors.wiki.ti.com/.../LAUNCHXL2-RM57L

Arm-based microcontrollers

Arm-based microcontrollers forum

Hercules Safety MCU Demos how to connect to my launchpad with my program