TM4C and Tivaware support AOA(Android Open Accessory)?

Ernest Cho

Hello Champs!

Could you let me know if TM4C and TivaWare supports Android Open Accessory(AOA) protocol?

In my research, the accessory need to support Host mode(OTG) so TM4C1236, TM4C1237, TM4C123G, TM4C129xx can be a accessory-side MCU.
But I can't see any AOA software which run at the TI TM4C(Tiva).

Could anyone know TM4C has AOA software code or library for developing Android accessories faster from customer side?

Regards,
Ernest Cho

over 9 years ago

0 Ernest Cho over 9 years ago

TI__Expert 3171 points

There're few AOA discussion in E2E I've seen.
e2e.ti.com/.../1610183
e2e.ti.com/.../217926

0 Sai Reddy over 9 years ago in reply to Ernest Cho

TI__Mastermind 22580 points

Hello Ernest,

There is no AOA supported software/library from TI for TM4C that I know of. As one of the forum posts suggests, can you use one of the FTDI chips, that have the AOA implemented, to act as a bridge between TM4C and the Android device?

Thanks,
Sai

0 Ernest Cho over 9 years ago in reply to Sai Reddy

TI__Expert 3171 points

Hello Sai,

OK, I see. But do you have any plan for AOA support on TM4C?

Regards,
Ernest

0 Sai Reddy over 9 years ago in reply to Ernest Cho

TI__Mastermind 22580 points

Hello Ernest,

I don't think we have any plan to support AOA on TM4C.

Thanks,
Sai

Arm-based microcontrollers

Arm-based microcontrollers forum

TM4C and Tivaware support AOA(Android Open Accessory)?