TM4C123GH6PGE UART pin confirmation need

Expert 2065 points

Other Parts Discussed in Thread: TM4C123GH6PGE

Hello,

I am a bit confused with the TM4C123GH6PGE datasheet.

Can you please confirm which pin are allocated for UART 1 with data flow control particularly for RX and TX , same for RTS and CTS

I don't understand why there are two pins sometimes in the table below

over 9 years ago

0 Amit Ashara over 9 years ago

TI__Guru**** 244400 points

Hello Chris

Multiple pin mappings allow that if one pin is used for some other peripheral another pin if available can be used for the function provided by the peripheral.

0 C over 9 years ago in reply to Amit Ashara

Expert 2065 points

Amit,
Can I consider the following connection proper ?
35,36 for TX, RX
61,62,63,64,65 for dtr, rts, cts, dcd, ri

0 Amit Ashara over 9 years ago in reply to C

TI__Guru**** 244400 points

Hello Chris

Yes, that is possible.

Arm-based microcontrollers

Arm-based microcontrollers forum

TM4C123GH6PGE UART pin confirmation need