Dear Masters:
Could you please let me know if there is any sequence requirements on these 2 RST signal when designing hardware of 570?
Thank you so much.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear Masters:
Could you please let me know if there is any sequence requirements on these 2 RST signal when designing hardware of 570?
Thank you so much.
Hi Eric.
The nRST is a bidirectional reset signal. The nRST is a warm reset. The internal circuitry drives the signal low on detecting any device reset condition. The causes of warm reset includes the power up reset which is the cold reset. So to answer your question, as long as the nPORRST is active low the nRST remains low.