error #10234-D: unresolved symbols remain error #10010: errors encountered during linking; "pwm_todos.out" not built

Miguel Amezcua Peregrina

Genius 4015 points

Other Parts Discussed in Thread: HALCOGEN

I had everything working yesterday but today, after the Halcogen updated, I cannot longer compile a thing... any idea??

I already looked in many posts but I wasnt able to solve the problem...

Best regards

over 8 years ago

0 Anthony F. Seely over 8 years ago

TI__Guru 68920 points

Hi Miguel,

No idea what this is just from the description.

There should be a list of unresolved symbols though under the error message
error #10234-D: unresolved symbols remain

So you need to find out what is not resolved and then figure out why.

This could be a function that was renamed, or removed in the halcogen version update.
But knowing the name of the symbol would be the next step.

0 Miguel Amezcua Peregrina over 8 years ago

Genius 4015 points

I kinda solve it by re-generating the codes using the HALCOGEN 4.05.2. Apparently there is a bug on HALCOGEN 4.06 because I even have a problem with an "emif.h" file that the "system.c" was calling but that file didnt exist...

I even tried adding the full path to the lib files but it didnt work... so I still have no idea what could cause the problem...

0 Anthony F. Seely over 8 years ago in reply to Miguel Amezcua Peregrina

TI__Guru 68920 points

Ok well if you want to come back to the issue later, let me know what the unresolved symbol names are... we need to start there.

0 Miguel Amezcua Peregrina over 8 years ago in reply to Anthony F. Seely

Genius 4015 points

The problem is that what function could it be? I just generate the codes again with the older version and everything worked. I can't debbug today because I left the JTAG on the office and well... I will have to wait until tomorrow...

Arm-based microcontrollers

Arm-based microcontrollers forum

error #10234-D: unresolved symbols remain error #10010: errors encountered during linking; "pwm_todos.out" not built