9 bits uart doccuments

Thao Phan

Dear all

I wanna configure 9bits uart mode to send address and data between 2 devices. I read AN01280 but it seems to be outdated.

Can you recommend me updated doccuments?

Thanks.

over 8 years ago

0 Amit Ashara over 8 years ago

TI__Guru**** 244400 points

Hello Thao

Did you check the DriverLib User Guide for 9-bit UART mode?

0 Thao Phan over 8 years ago in reply to Amit Ashara

Prodigy 240 points

Hello Amit Ashara.

Yes, I have. Is it all about 9 bit mode?

0 Amit Ashara over 8 years ago in reply to Thao Phan

TI__Guru**** 244400 points

Hello Thao

Then why not use the API's to configure the UART for 9-bit operation mode and transmit data, check the data on a scope or a LA to see it is as expected. Also a code reference of what you are doing would be useful.

0 Thao Phan over 8 years ago in reply to Amit Ashara

Prodigy 240 points

Hello Amit Ashara

Thank you for your support. I'm following your guidance.
Have a nice week!

Arm-based microcontrollers

Arm-based microcontrollers forum

9 bits uart doccuments