I need to move a DC motor with a pre-defined schedule (depends on the local time) using TM4C129 microcontroller. How do I read the current local time at TM4C129?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
lilyhack said:I can read the time from a PC or Raspberry Pi which is wirelessly connected to the TI
I thought you said you weren't wirelessly connected?
Although that does raise the question of where do they get their time.
lilyhack said:I was expecting to read the current time inside the TI.
There does appear to be a RTC timer mode on the chip but I don't know anything about it. However you do need a way of setting and updating the time (RTCs driven by a 32767 crystal are not particularly accurate)
Robert
Robert Adsett said::) Maybe a fried bologna and cheese sandwich?
You may want to devour that quickly... ... ... before the "time" changes.
Is it not reasonable - that after 10-20 forum questions asked - and resolved - that posters (graduate) from their (self-described) "hack" status?
You may want to extend your "order" to a double. (and still eat FAST!) (before the (unrecorded) time changes...)