LM4F120

lightsaber

Hi. I'm using LM4F120 and want to make a motion detector. (also have booster pack). I wanna send signals to one of the pins but I cant do it. Can you give me some advice?

over 8 years ago

0 Amit Ashara over 8 years ago

TI__Guru**** 244400 points

Hello Lightsaber

Which boosterpack are you using for motion detection?

0 lightsaber over 8 years ago in reply to Amit Ashara

Prodigy 210 points

i have Sensor Hub Booster Pack

0 Amit Ashara over 8 years ago in reply to lightsaber

TI__Guru**** 244400 points

Hello LightSaber

Thanks for the information. Now can you please explain how you intend to do it? Do not that there are simpler PIR detection devices that can be integrated for detecting motion in an area without having to the move the SensorHub+Launchpad. Have you considered the same?

0 cb1 over 8 years ago in reply to Amit Ashara

Guru 47900 points

Similar post - authored by, "Dark_Treebranch" (@ sister forum) also, "Wanna send signals!"

Perhaps more basic, "Wanna read MCU manual & Code Examples" deserves (some/slight) consideration...

Poster may wanna note that his LX4F120 was very first LX4F part released - and did NOT include PWM Generator(s). (which may prove useful in such application...)

Arm-based microcontrollers

Arm-based microcontrollers forum

LM4F120