TM4C129XNCZAD

basawaraj talawar

hi,

in my development board PL4 and PL5 pins naming printed 2 times and PA3 pin name is not in the board please suggest me the solution for this

Thanking you

Basawaraj.T

over 8 years ago

0 Amit Ashara over 8 years ago

TI__Guru**** 244400 points

Hello Basawaraj

Do you mean the DK-TM4C129x board?

0 basawaraj talawar over 8 years ago in reply to Amit Ashara

Prodigy 210 points

yaa DK-TM4C129XNCZAD

0 Amit Ashara over 8 years ago in reply to basawaraj talawar

TI__Guru**** 244400 points

Hello Basawaraj,

That is OK. The PL4, PL5 are available on two headers for two different functions. However of PL4/PL5 is being used on one header it should not be used on another header.

PA3 is available on the EM header connector. So a special mating header would be required to bond it out.

Arm-based microcontrollers

Arm-based microcontrollers forum

TM4C129XNCZAD